MAILBEE POP3 SMTP WEBMAIL IMAP4 POP IMAP EMAIL COMPONENT VB ASP ACTIVEX COM VBA OCX NET .NET C# VB.NET ASP.NET DOWNLOAD QUEUE SSL SECURITY CENSOR ACCESS PARSER C++ DLL CONTROL LIBRARY MIME INTERFACE

AfterLogic Aurora

AfterLogic Forum : AfterLogic Aurora

Topic: Apple mobileconfig

Author

Message

<< Prev Topic | Next Topic >>

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 30 June 2020 at 1:23am \| IP Logged

afterlogic.mobileconfig contains actual IMAP and SMTP server addresses (the ones where webmail connects) that are declared in mail server settings for IMAP and SMTP connection, not those that are declared in "IMAP and SMTP hosts for external mail clients"

Example: SMTP and IMAP for webmail to connect is 127.0.0.1, for external mail clients servers are imap.example.com and smtp.example.com
afterlogic.mobileconfig contains in that case:
<key>IncomingMailServerHostName</key>
<string>127.0.0.1</string>

Also, when initially creating mail server definition, last block (IMAP and SMTP hosts for external mail clients) is not saved. It can be saved only if mail server is already defined.

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 30 June 2020 at 2:16am \| IP Logged

Thank you for your feedback. I've confirmed both the issues and have reported to the developers.

--
Regards,
Igor, Afterlogic Support

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 23 September 2020 at 5:57am \| IP Logged

Issue still exists in v8.5.1

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 23 September 2020 at 6:05am \| IP Logged

Indeed, the issue with iOS profile wasn't corrected yet. This thread mentions another issue though, and I believe it was fixed in 8.5.0:

Quote:

when initially creating mail server definition, last block (IMAP and SMTP hosts for external mail clients) is not saved. It can be saved only if mail server is already defined.

--
Regards,
Igor, Afterlogic Support

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 23 September 2020 at 6:59am \| IP Logged

Yes, this is correct.

External mail clients block saving issue is fixed.

Remains just iOS profile issue.

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 12 November 2020 at 6:16am \| IP Logged

Just heard from the developers on this. "IMAP and SMTP hosts for external mail clients" section is of purely informative purpose and hosts there will be shown on user's Settings screen. For iOS profile, the following data from data/settings/modules/Mail.config.json file are used:

Code:

"ExternalHostNameOfLocalImap": [

     "",

     "string"

],

"ExternalHostNameOfLocalSmtp": [

     "",

     "string"

],

and they're only used if mailserver hostname is set to 127.0.0.1 or localhost.

--
Regards,
Igor, Afterlogic Support

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 22 November 2020 at 1:38pm \| IP Logged

I see.

How this setting is used if certain mail server configuration has different data than other?

Example:
Webmail is located at webmail.domain.com
One IMAP server for domain.com is located at imap.domain.com accessible by webmail via internal network 10.0.0.10
Second IMAP server for domain.org is located at imap.domain.org accessible by webmail via internal network 10.10.10.20

Mail servers in aurora config, is configured to use internal addresses. External e-mail clients use FQDN for IMAP access.

In that setup (since there is multiple imap servers), there is no possibility to use Mail.config.json server definitions, server definitions must come from specific mail server config in aurora.

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 22 November 2020 at 10:55pm \| IP Logged

Currently, those settings only apply if IMAP server is set to either 127.0.0.1 or localhost.

--
Regards,
Igor, Afterlogic Support

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 23 November 2020 at 3:44am \| IP Logged

Yes, what i'm saying is:

If imap server for aurora is in internal network (10.10.10.20) it will be shown on iOS profile.

Wouldn't it be more correct way if external IMAP servers would be shown (on settings screen and iOS profile) if they are defined, regardless what actual IMAP server for aurora is?

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 23 November 2020 at 3:57am \| IP Logged

Well, it's more like a different approach. But I see the point, and it doesn't really conflict with the current behavior. We'll consider implementing it in the future versions.

--
Regards,
Igor, Afterlogic Support

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 15 April 2022 at 8:52am \| IP Logged

Seems to be broken on v 9.3.3

Mobileconfig file does contain IP address for IncomingMailServerHostName which is stated in mail server config in aurora admin panel.
Should contain host name that is set in Mail.config.json ExternalHostNameOfLocalImap
Outgoing (SMTP) definition is correct in mobileconfig file.
Both, ExternalHostNameOfLocalImap and ExternalHostNameOfLocalSmtp are set in Mail.config.json

Also, mobileconfig does not contain password for caldav and carddav.
Imap and smtp block do contain password, and IncludePasswordInProfile is "true" in Ios.config.json

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 15 April 2022 at 9:02am \| IP Logged

Another thing that is a bit confusing.

Mail server names for mobileconfig supposedly come from Mail.config.json but SSL configuration (to use it or not) comes from mail server configuration in admin panel.

This is a bit weird since usually webmail connects to imap on localhost where there is no need for SSL, but this setting (no ssl) gets used in mobileconfig which should use it.

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 17 April 2022 at 4:51am \| IP Logged

I believe that starting from 9.3.2, ExternalHostNameOfLocalImap and ExternalHostNameOfLocalSmtp values from Mail.config.json are no longer used for generating iOS profile. Instead, "IMAP and SMTP hosts for external mail clients" values from mail server configuration are used.

Quote:

Mail server names for mobileconfig supposedly come from Mail.config.json but SSL configuration (to use it or not) comes from mail server configuration in admin panel.

That part doesn't seem to be related to the recent changes, the behavior probably was like that for a while, I'll discuss this with the developers - we'll probably be adding SSL options to "IMAP and SMTP hosts for external mail clients" section as well.

Quote:

Also, mobileconfig does not contain password for caldav and carddav.
Imap and smtp block do contain password, and IncludePasswordInProfile is "true" in Ios.config.json

Interesting. Are you saying that this behavior was different in previous versions?

--
Regards,
Igor, Afterlogic Support

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 17 April 2022 at 10:09am \| IP Logged

Hmmm, that's interesting.

I have correctly set server names in "IMAP and SMTP hosts for external mail clients" but mobileconfig file still contains ip addresses for internal network which are set up in "Mail servers settings" in admin panel.

>we'll probably be adding SSL options to "IMAP and SMTP hosts for external mail clients"
That would be great.

>Are you saying that this behavior was different in previous versions?
Not sure. I haven't tested mobileconfig for a while, but i remember that profile import did not ask for password in past at some point, i don't remember which version it was then.

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 18 April 2022 at 12:01am \| IP Logged

Quote:

I have correctly set server names in "IMAP and SMTP hosts for external mail clients" but mobileconfig file still contains ip addresses for internal network which are set up in "Mail servers settings" in admin panel.

Just like previously with Mail.config.json settings used, "IMAP and SMTP hosts for external mail clients" settings would only apply if IMAP host equals localhost or 127.0.0.1, we didn't change that aspect of the feature.

Quote:

Also, mobileconfig does not contain password for caldav and carddav.
Imap and smtp block do contain password, and IncludePasswordInProfile is "true" in Ios.config.json

I've just confirmed with the developers that DAV password should be included as well, but looks like there's a bug with IncludePasswordInProfile setting, getAuthenticatedAccountPassword() function wasn't updated to database model of v9. We'll have it corrected in one of the nearest releases.

--
Regards,
Igor, Afterlogic Support

Igor
AfterLogic Support

Joined: 24 June 2008
Location: United States
Online Status: Offline
Posts: 6038

Posted: 18 April 2022 at 12:07am \| IP Logged

In fact, the fix is already here - replace getAuthenticatedAccountPassword() function in modules/Ios/Manager.php file with:

Code:

private function getAuthenticatedAccountPassword()

{

     $aUserInfo = \Aurora\System\Api::getAuthenticatedUserInfo();

     $sAccountPassword = '';

     if (isset($aUserInfo['account']) && isset($aUserInfo['accountType']))

     {

          $oAccount = call_user_func_array([$aUserInfo['accountType'], 'find'], [(int)$aUserInfo['account']]);

          if ($oAccount) {

               $sAccountPassword = $oAccount->getPassword();

          }

     }

     return $sAccountPassword;

}

And of course, it'll be included in the next update. Thanks!

--
Regards,
Igor, Afterlogic Support

solkmaaker
Senior Member

Joined: 28 June 2020
Online Status: Offline
Posts: 153

Posted: 18 April 2022 at 2:31am \| IP Logged

Igor wrote:

Ah, yes, forgot about that.
Since i'm using private ip address on server config and it is not 127.0.0.1 or localhost, it is showing on mobileconfig file.

As for password, thank you for update on this.

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version

Forum Jump

.NET Components

ActiveX Components

Web scripts

Solutions

AfterLogic Aurora