Search The ForumSearch   RegisterRegister  LoginLogin

MailBee POP3
 AfterLogic Forum : MailBee POP3
Subject Topic: Save file not working Post ReplyPost New Topic
Author
Message << Prev Topic | Next Topic >>
noamway
Newbie
Newbie


Joined: 24 May 2007
Online Status: Offline
Posts: 15
Posted: 25 May 2007 at 2:31am | IP Logged Quote noamway
I get the file size and is name, I check the path and is ok too, it's only don't want to sace the file in the server (I make all the
permit for saving)

Set Attachments     = objMsgs.Attachments

For i = 0 To Attachments.Count - 1

     Set at = Attachments(i)

     file    &n bsp;         &n bsp;= at.Filename
     fileSizeNUM   & nbsp;      = at.Size
     path    &n bsp;         &n bsp;= filesys.GetAbsolutePathName(server.mappath("/image/bizzzzz/" )&"/"&file)

     If Not at.SaveFile(path) Then response.write "<br>I/O Error" End If

     set at         &nbs p;     = nothing
Next
set Attachments        & nbsp; = nothing
Back to Top View noamway's Profile Search for other posts by noamway
 
Andrew
AfterLogic Support
AfterLogic Support


Joined: 28 April 2006
Location: United States
Online Status: Offline
Posts: 1189
Posted: 25 May 2007 at 3:33am | IP Logged Quote Andrew
As described in MailBee Objects documentation, SaveFile method requires two parameters: path to the directory and optional filename. So, you should modify your source code as follows:

Code:

Set Attachments = objMsgs.Attachments

For i = 0 To Attachments.Count - 1

     Set at = Attachments(i)

     file = at.Filename
     fileSizeNUM = at.Size
     path  = filesys.GetAbsolutePathName(server.mappath("/image/bizzzzz/" ))

     If Not at.SaveFile(path, file) Then response.write "<br>I/O Error" End If

     set at = nothing
Next
set Attachments = nothing




Best regards,
Andrew
Back to Top View Andrew's Profile Search for other posts by Andrew
 
noamway
Newbie
Newbie


Joined: 24 May 2007
Online Status: Offline
Posts: 15
Posted: 25 May 2007 at 1:35pm | IP Logged Quote noamway
I think you wrong:
1. In your documentation you wrote this:
If Not Attach.SaveFile ("C:\Data Files") Then MsgBox "I/O Error"
There is no two parameters there.

2. I try what you say and I still can't save the file.
Back to Top View noamway's Profile Search for other posts by noamway
 
Alex
AfterLogic Support
AfterLogic Support
Avatar

Joined: 19 November 2003
Online Status: Offline
Posts: 2207
Posted: 25 May 2007 at 2:36pm | IP Logged Quote Alex
If you read Andrew's posting again, you'll find that Attach.SaveFile indeed accepts two parameters, the second parameter is optional. However, it's not always possible to determine it. For instance, the filename can be empty. In this case, you should check if Filename is not empty and invent your own filename if there had been none in the attachment.

Anyway, you can save the file using FileSystemObject. Unlike Attach.SaveFile, FileSystemObject throws an exception rather than returns False in the case of failure. With FileSystemObject and additional information available in exception details, you'll be able to find out what's wrong with the code. For instance, in your code you try to save your file into a folder passing your filename as a folder name. If you wish to save your file using absolute path to the file, not to the folder, this is another reason to use FileSystemObject. But remember to check if Attach.Filename is empty and generate your own name in this case.

Code:

Set fso = Server.CreateObject("Scripting.FileSystemObject")
Set f = fso.CreateTextFile(path_where_to_save_file)
f.Write Attach.Content
f.Close


Regards,
Alex
Back to Top View Alex's Profile Search for other posts by Alex
 
noamway
Newbie
Newbie


Joined: 24 May 2007
Online Status: Offline
Posts: 15
Posted: 25 May 2007 at 4:06pm | IP Logged Quote noamway
Hi Alex,

In FSO it's working well and I check the "Attach.Filename" and he have a name.

So I don't understand why this is not working:
Attach.SaveFile
Back to Top View noamway's Profile Search for other posts by noamway
 
Andrew
AfterLogic Support
AfterLogic Support


Joined: 28 April 2006
Location: United States
Online Status: Offline
Posts: 1189
Posted: 26 May 2007 at 4:02am | IP Logged Quote Andrew
The following sample saves two copies of the same attachment through SaveFile and FileSystemObject with different filename prefixes:

Code:
Set Attachments = objMsgs.Attachments

For i = 0 To Attachments.Count - 1
  Set at = Attachments(i)
  file = at.Filename

  If Len(file) > 0 Then
    fileSizeNUM = at.Size
    path  = filesys.GetAbsolutePathName(server.mappath("/image/bizzzzz/" ))

    ' Save the file through SaveFile
    If Not at.SaveFile(path, "SaveFile_" & file) Then response.write "<br>I/O Error" End If

    ' Save the file through FileSystemObject to the same location
    Set fso = Server.CreateObject("Scripting.FileSystemObject")
    Set f = fso.CreateTextFile(path & "\FSO_" & file)
    f.Write at.Content
    f.Close
  Else
    response.write "<br>Filename is empty"
  End If

  set at = nothing
Next
set Attachments = nothing


Does this sample save both the files (with SaveFile_ and FSO_ pefixes) for you?


Best regards,
Andrew
Back to Top View Andrew's Profile Search for other posts by Andrew
 
noamway
Newbie
Newbie


Joined: 24 May 2007
Online Status: Offline
Posts: 15
Posted: 27 May 2007 at 5:31pm | IP Logged Quote noamway
I'm sorry but it's still not working. with FSO it's save but with SaveFile it's not
Back to Top View noamway's Profile Search for other posts by noamway
 
noamway
Newbie
Newbie


Joined: 24 May 2007
Online Status: Offline
Posts: 15
Posted: 27 May 2007 at 5:33pm | IP Logged Quote noamway
OK, you right, it's working fine :-)

Thanks for your help
Back to Top View noamway's Profile Search for other posts by noamway
 

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

  Post ReplyPost New Topic
Printable version Printable version

Forum Jump

Powered by Web Wiz Forums version 7.9
Copyright ©2001-2004 Web Wiz Guide